Products
Our current range centres on the Ampd 200 and Ampd 400, mobile battery energy storage systems made by Ampd Energy. Every figure here comes from the manufacturer’s IEC brochures and keeps its revision, unit and duration.
Which unit suits a project, and in what configuration, is settled by a technical assessment. Availability for your territory is confirmed in your proposal.
IEC · Rev 1.3 · 29 April 2026
IEC · Rev 1.3 · 29 April 2026
Source: Ampd 200 IEC brochure, Rev 1.3, dated 29 April 2026; Ampd 400 IEC brochure, Rev 1.3, dated 29 April 2026. Manufacturer-published figures for the IEC variant, not independently tested. Specifications can change, so the current data sheet for your territory is confirmed in a project proposal.
Each unit has three output ratings. The nominal rating is what it sustains. The two overload ratings are higher but time-limited: one for up to 60 seconds, one for up to 10 seconds.
Overloads matter for motor starting and short lifts. They are not a larger continuous rating, and the brochures do not set out the conditions for repeated overloads, so demanding duty cycles are checked by an engineer.
Ampd 200
Ampd 400
Standard specification as listed. Optional equipment is shown separately on each product page and is not included unless it is specified in a proposal.
| Specification | Ampd 200IEC · Rev 1.3 · 29 April 2026 | Ampd 400IEC · Rev 1.3 · 29 April 2026 |
|---|---|---|
| Output | ||
| Nominal output power | 193 kW / 214 kVA | 386 kW / 428 kVA |
| Nominal output current at 380 / 400 / 415 Vac | 325 / 309 / 298 A | 650 / 618 / 595 A |
| Overload output, up to 60 secondsTime-limited rating, not continuous output. | 233 kW / 248 kVA | 466 kW / 496 kVA |
| Overload current, up to 60 seconds, at 380 / 400 / 415 Vac | 377 / 358 / 345 A | 754 / 716 / 690 A |
| Overload output, up to 10 secondsTime-limited rating, not continuous output. | 292 kW / 297 kVA | 585 kW / 595 kVA |
| Overload current, up to 10 seconds, at 380 / 400 / 415 Vac | 452 / 429 / 414 A | 904 / 858 / 827 A |
| Energy storage | ||
| Rated nominal DC capacityNominal DC capacity. Usable delivered AC energy is lower and is confirmed per project. | 215 kWh | 430 kWh |
| Battery cell type | CATL lithium iron phosphate (lfp) | CATL lithium iron phosphate (lfp) |
| Rated battery cell lifeCell rating. The brochure states it does not equal warranted cycles. | 9,000 cycles | 9,000 cycles |
| Charging input | ||
| Maximum charging powerUnit limit. Actual charging depends on the supply available on site. | 205 kW | 410 kW |
| Maximum charging current at 380 / 400 / 415 Vac | 312 / 297 / 286 A | 624 / 593 / 571 A |
| Electrical | ||
| Voltage range | 380 to 415 Vac (3Ph + N + PE) | 380 to 415 Vac (3Ph + N + PE) |
| Frequency, as printed | 50 / 60 ± 2.5 Hz | 50 / 60 ± 2.5 Hz |
| Generator integration | ||
| Supported configuration | Ampd 200 connected with 1 generator | Ampd 400 connected with 1 generator |
| Microgrid controller compatibility | ComAp or DeepSea | ComAp or DeepSea |
| Recommended maximum generator capacityA recommended maximum, not a minimum or default generator size. | 350 kVA | 650 kVA |
| Mechanical | ||
| Ambient operating temperature | −30 to +55 °C (derating from 45 °C) | −20 to +50 °C (derating from 45 °C) |
| Dimensions (L × W × H) | 2.40 × 2.15 × 2.20 m | 3.0 × 2.3 × 2.4 m |
| Maximum wet weightActual weight depends on the optional features fitted. | 5,500 kg | 9,000 kg |
| Ingress protection: batteries and HVAC | IP67 | IP67 |
| Ingress protection: container enclosure | IP55 | IP54 |
| Corrosion protection (standard) | C3 | C3 |
| Other | ||
| Fire suppression system | Aerosol agent | Aerosol agent |
| Thermal management and coolant | Liquid cooled, ethylene glycol | Liquid cooled, ethylene glycol |
| Connectivity | Cellular 4G | Cellular 4G |
| Warranty durationDuration only. Warranty terms and any warranted throughput are confirmed in a proposal. | 5 years | 5 years |
A short brief is enough to start. “Not sure” is an acceptable answer to every technical question, and you see a summary of your project before you add any contact details.